dmesg - disk test Pico-PC

Return To disk test Pico-PC System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-142-generic (buildd@lcy01-amd64-006) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.4) ) #168~14.04.1-Ubuntu SMP Sat Jan 19 11:26:28 UTC 2019 (Ubuntu 4.4.0-142.168~14.04.1-generic 4.4.167)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
tseg: 006e000000
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000006b355fff] usable
BIOS-e820: [mem 0x000000006b356000-0x000000006bdf5fff] reserved
BIOS-e820: [mem 0x000000006bdf6000-0x000000006befcfff] usable
BIOS-e820: [mem 0x000000006befd000-0x000000006c2b2fff] ACPI NVS
BIOS-e820: [mem 0x000000006c2b3000-0x000000006d2dafff] reserved
BIOS-e820: [mem 0x000000006d2db000-0x000000006d326fff] type 20
BIOS-e820: [mem 0x000000006d327000-0x000000006d327fff] usable
BIOS-e820: [mem 0x000000006d328000-0x000000006d32ffff] ACPI NVS
BIOS-e820: [mem 0x000000006d330000-0x000000006d47bfff] usable
BIOS-e820: [mem 0x000000006d47c000-0x000000006d914fff] reserved
BIOS-e820: [mem 0x000000006d915000-0x000000006d968fff] usable
BIOS-e820: [mem 0x000000006d969000-0x000000006dfe9fff] reserved
BIOS-e820: [mem 0x000000006dfea000-0x000000006dffffff] usable
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb00fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi:  ESRT=0x6d2d9c18  ACPI=0x6bf7f000  ACPI 2.0=0x6bf7f000  SMBIOS=0xf05b0  MPS=0xfd640 
esrt: Reserving ESRT space from 0x000000006d2d9c18 to 0x000000006d2d9c50.
SMBIOS 2.8 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./Larne CRB, BIOS 4.6.5 02/08/2017
Kernel/User page tables isolation: disabled
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x6e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-CEFFF write-protect
  CF000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FF80000000 write-back
  1 base 006F000000 mask FFFF000000 uncachable
  2 base 0070000000 mask FFF0000000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 1776MB, range: 16MB, type UC
reg 2, base: 1792MB, range: 256MB, type UC
total RAM covered: 1776M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 512M 	num_reg: 3  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 1776MB, range: 16MB, type UC
reg 2, base: 1792MB, range: 256MB, type UC
found SMP MP-table at [mem 0x000fd870-0x000fd87f] mapped at [ffff8800000fd870]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 28672
Using GB pages for direct mapping
BRK [0x02219000, 0x02219fff] PGTABLE
BRK [0x0221a000, 0x0221afff] PGTABLE
BRK [0x0221b000, 0x0221bfff] PGTABLE
BRK [0x0221c000, 0x0221cfff] PGTABLE
BRK [0x0221d000, 0x0221dfff] PGTABLE
BRK [0x0221e000, 0x0221efff] PGTABLE
RAMDISK: [mem 0x351d6000-0x368e2fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000006BF7F000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000006BF7F088 00008C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x000000006BF83E30 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
ACPI: DSDT 0x000000006BF7F1A8 004C86 (v02 ALASKA A M I    00000000 INTL 20051117)
ACPI: FACS 0x000000006C2A1E80 000040
ACPI: APIC 0x000000006BF83F40 00007E (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x000000006BF83FC0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x000000006BF84008 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x000000006BF840A8 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: HPET 0x000000006BF840E8 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: WDRT 0x000000006BF84120 000047 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: SSDT 0x000000006BF84168 00043C (v01 AMD    AGESA    00000001 AMD  00000001)
ACPI: SSDT 0x000000006BF845A8 0048A6 (v02 AMD    AGESA    00000002 MSFT 04000000)
ACPI: SSDT 0x000000006BF88E50 000474 (v01 AMD    CPMXPRES 00000001 INTL 20051117)
ACPI: SSDT 0x000000006BF892C8 001207 (v01 AMD    CPMCMN   00000001 INTL 20051117)
ACPI: SSDT 0x000000006BF8A4D0 001457 (v01 AMD    CPMDFIGP 00000001 INTL 20051117)
ACPI: SSDT 0x000000006BF8B928 00008F (v01 AMD    CPMDFMOT 00000001 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000006dffffff]
NODE_DATA(0) allocated [mem 0x6bef4000-0x6bef8fff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x000000006dffffff]
  Normal   empty
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009ffff]
  node   0: [mem 0x0000000000100000-0x000000006b355fff]
  node   0: [mem 0x000000006bdf6000-0x000000006befcfff]
  node   0: [mem 0x000000006d327000-0x000000006d327fff]
  node   0: [mem 0x000000006d330000-0x000000006d47bfff]
  node   0: [mem 0x000000006d915000-0x000000006d968fff]
  node   0: [mem 0x000000006dfea000-0x000000006dffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000006dffffff]
On node 0 totalpages: 439731
  DMA zone: 64 pages used for memmap
  DMA zone: 26 pages reserved
  DMA zone: 3999 pages, LIFO batch:0
  DMA32 zone: 6976 pages used for memmap
  DMA32 zone: 435732 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 4, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x6b356000-0x6bdf5fff]
PM: Registered nosave memory: [mem 0x6befd000-0x6c2b2fff]
PM: Registered nosave memory: [mem 0x6c2b3000-0x6d2dafff]
PM: Registered nosave memory: [mem 0x6d2db000-0x6d326fff]
PM: Registered nosave memory: [mem 0x6d328000-0x6d32ffff]
PM: Registered nosave memory: [mem 0x6d47c000-0x6d914fff]
PM: Registered nosave memory: [mem 0x6d969000-0x6dfe9fff]
e820: [mem 0x6e000000-0xfeafffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 34 pages/cpu @ffff88006ae00000 s99480 r8192 d31592 u524288
pcpu-alloc: s99480 r8192 d31592 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 432665
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1650412K/1758924K available (8390K kernel code, 1341K rwdata, 4024K rodata, 1492K init, 1316K bss, 108512K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:1000 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1347.503 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2695.00 BogoMIPS (lpj=5390012)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 7 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
Disabling Indirect Branch Predictor Support
mce: CPU supports 6 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 32K
ftrace: allocating 32313 entries in 127 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD E1-6010 APU with AMD Radeon R2 Graphics (family: 0x16, model: 0x30, stepping: 0x1)
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (5390.01 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x6befd000-0x6c2b2fff] (3891200 bytes)
PM: Registering ACPI NVS region [mem 0x6d328000-0x6d32ffff] (32768 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 16:58:36, date: 09/27/19
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x7f000000-0xfed3ffff window]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
pci 0000:00:01.0: [1002:9853] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io  0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x24: [mem 0xfea00000-0xfea3ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfea64000-0xfea67fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
pci 0000:00:08.0: reg 0x10: [mem 0xd0900000-0xd091ffff 64bit pref]
pci 0000:00:08.0: reg 0x18: [mem 0xfe800000-0xfe8fffff]
pci 0000:00:08.0: reg 0x1c: [mem 0xfea70000-0xfea70fff]
pci 0000:00:08.0: reg 0x24: [mem 0xfea6a000-0xfea6bfff]
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfea68000-0xfea69fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io  0xf140-0xf147]
pci 0000:00:11.0: reg 0x14: [io  0xf130-0xf133]
pci 0000:00:11.0: reg 0x18: [io  0xf120-0xf127]
pci 0000:00:11.0: reg 0x1c: [io  0xf110-0xf113]
pci 0000:00:11.0: reg 0x20: [io  0xf100-0xf10f]
pci 0000:00:11.0: reg 0x24: [mem 0xfea6f000-0xfea6f3ff]
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:12.0: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.0: reg 0x10: [mem 0xfea6e000-0xfea6e0ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.0: reg 0x10: [mem 0xfea6d000-0xfea6d0ff]
pci 0000:00:13.0: supports D1 D2
pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
pci 0000:00:14.7: reg 0x10: [mem 0xfea6c000-0xfea6c0ff 64bit]
pci 0000:00:14.7: PME# supported from D3cold
pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
pci 0000:01:00.0: [10ec:8176] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [io  0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x18: [mem 0xfe900000-0xfe903fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.2:   bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xd0804000-0xd0804fff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:02.3: PCI bridge to [bus 02]
pci 0000:00:02.3:   bridge window [io  0xd000-0xdfff]
pci 0000:00:02.3:   bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *4 5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
ACPI: Enabled 3 GPEs in block 00 to 1F
vgaarb: setting as boot device: PCI:0000:00:01.0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x6b356000-0x6bffffff]
e820: reserve RAM buffer [mem 0x6befd000-0x6bffffff]
e820: reserve RAM buffer [mem 0x6d328000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6d47c000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6d969000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6e000000-0x6fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0x6f000000-0x7effffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io  0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io  0x04d0-0x04d1] has been reserved
system 00:05: [io  0x040b] has been reserved
system 00:05: [io  0x04d6] has been reserved
system 00:05: [io  0x0c00-0x0c01] has been reserved
system 00:05: [io  0x0c14] has been reserved
system 00:05: [io  0x0c50-0x0c51] has been reserved
system 00:05: [io  0x0c52] has been reserved
system 00:05: [io  0x0c6c] has been reserved
system 00:05: [io  0x0c6f] has been reserved
system 00:05: [io  0x0cd0-0x0cd1] has been reserved
system 00:05: [io  0x0cd2-0x0cd3] has been reserved
system 00:05: [io  0x0cd4-0x0cd5] has been reserved
system 00:05: [io  0x0cd6-0x0cd7] has been reserved
system 00:05: [io  0x0cd8-0x0cdf] has been reserved
system 00:05: [io  0x0800-0x089f] has been reserved
system 00:05: [io  0x0b20-0x0b3f] has been reserved
system 00:05: [io  0x0900-0x090f] has been reserved
system 00:05: [io  0x0910-0x091f] has been reserved
system 00:05: [io  0xfe00-0xfefe] has been reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:05: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.2:   bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:02.3: PCI bridge to [bus 02]
pci 0000:00:02.3:   bridge window [io  0xd000-0xdfff]
pci 0000:00:02.3:   bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0x7f000000-0xfed3ffff window]
pci_bus 0000:00: resource 11 [mem 0xfed45000-0xffffffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 23604K
perf: AMD NB counters detected
perf: AMD L2I counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1569603516.076:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90000400000, using 3648k, total 3648k
efifb: mode is 1280x720x32, linelength=5120, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x45
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.0: EHCI Host Controller
ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.0: debug port 2
ehci-pci 0000:00:12.0: irq 18, io mem 0xfea6e000
ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-142-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:13.0: EHCI Host Controller
ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.0: debug port 2
ehci-pci 0000:00:13.0: irq 18, io mem 0xfea6d000
ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-142-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-142-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:10.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.0-142-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:10.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=0438, idProduct=7900
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: New USB device found, idVendor=0438, idProduct=7900
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 1-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
hub 1-1:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 1347.473 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x136c4bf1822, max_idle_ns: 440795212160 ns
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0: patch_level=0x07030105
microcode: CPU1: patch_level=0x07030105
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 196df9006c77aed2ee3d80d8cb8bc0fc33590e01'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
evm: HMAC attrs: 0x1
  Magic number: 3:189:996
rtc_cmos 00:03: setting system clock to 2019-09-27 16:58:38 UTC (1569603518)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1492K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1840K
Freeing unused kernel memory: 72K
systemd-udevd[108]: starting version 204
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
usb 1-1.1: new low-speed USB device number 3 using ehci-pci
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc900003d2000, 70:b3:d5:9a:a5:10, XID 0c900800 IRQ 32
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m1024@0xfea6f000 port 0xfea6f100 irq 33
ata2: SATA max UDMA/133 abar m1024@0xfea6f000 port 0xfea6f180 irq 33
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
sdhci-pci 0000:00:14.7: No vmmc regulator found
sdhci-pci 0000:00:14.7: No vqmmc regulator found
mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
usb 1-1.1: New USB device found, idVendor=413c, idProduct=2005
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: DELL USB Keyboard
usb 1-1.1: Manufacturer: DELL
usb 1-1.3: new low-speed USB device number 4 using ehci-pci
usb 1-1.3: New USB device found, idVendor=045e, idProduct=0797
usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.3: Product: USB Optical Mouse
ata2: SATA link down (SStatus 0 SControl 300)
usb 1-1.4: new full-speed USB device number 5 using ehci-pci
usb 1-1.4: New USB device found, idVendor=10c4, idProduct=ea71
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=7
usb 1-1.4: Product: CP2108 Quad USB to UART Bridge Controller
usb 1-1.4: Manufacturer: Silicon Labs
usb 1-1.4: SerialNumber: 66A3D0B155175C8E11E6BDEFB563484
hidraw: raw HID events driver (C) Jiri Kosina
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-11: SATA SSD, 0200S810, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SATA SSD         S810 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:413C:2005.0001/input/input2
EXT4-fs (sda2): INFO: recovery required on readonly filesystem
EXT4-fs (sda2): write access will be enabled during recovery
hid-generic 0003:413C:2005.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:12.0-1.1/input0
input: USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:045E:0797.0002/input/input3
hid-generic 0003:045E:0797.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:12.0-1.3/input0
EXT4-fs (sda2): orphan cleanup on readonly fs
EXT4-fs (sda2): 1 orphan inode deleted
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
random: init: uninitialized urandom read (12 bytes read, 42 bits of entropy available)
clocksource: Switched to clocksource tsc
init: plymouth-upstart-bridge main process (174) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (185) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (195) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
random: mountall: uninitialized urandom read (12 bytes read, 56 bits of entropy available)
Adding 1758204k swap on /dev/sda3.  Priority:-1 extents:1 across:1758204k SSFS
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
random: lsb_release: uninitialized urandom read (24 bytes read, 109 bits of entropy available)
systemd-udevd[333]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
random: mktemp: uninitialized urandom read (10 bytes read, 111 bits of entropy available)
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:01: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
random: dbus-daemon: uninitialized urandom read (12 bytes read, 111 bits of entropy available)
random: lsb_release: uninitialized urandom read (24 bytes read, 111 bits of entropy available)
random: dbus-daemon: uninitialized urandom read (12 bytes read, 111 bits of entropy available)
ccp 0000:00:08.0: 4 command queues available
ccp 0000:00:08.0: enabled
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
random: lsb_release: uninitialized urandom read (24 bytes read, 112 bits of entropy available)
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
EDAC MC: Ver: 3.0.0
random: avahi-daemon: uninitialized urandom read (4 bytes read, 115 bits of entropy available)
audit: type=1400 audit(1569603521.751:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=528 comm="apparmor_parser"
audit: type=1400 audit(1569603521.751:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=528 comm="apparmor_parser"
audit: type=1400 audit(1569603521.751:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=529 comm="apparmor_parser"
audit: type=1400 audit(1569603521.751:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=529 comm="apparmor_parser"
audit: type=1400 audit(1569603521.751:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=529 comm="apparmor_parser"
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
random: cupsd: uninitialized urandom read (120 bytes read, 116 bits of entropy available)
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
[drm] radeon kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel 
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (c0000000 390000) vs hw (c0000000 10000000)
fb: switching to radeondrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (MULLINS 0x1002:0x9853 0x1002:0x0123).
[drm] register mmio base: 0xFEA00000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xD0000000
[drm] doorbell mmio size: 8388608
ATOM BIOS: AMD
radeon 0000:00:01.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
radeon 0000:00:01.0: GTT: 2048M 0x0000000010000000 - 0x000000008FFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone  kernel: Available graphics memory: 857098 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading mullins Microcode
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
[drm] Found VCE firmware/feedback version 40.2.2 / 15!
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver cp210x
cp210x 1-1.4:1.0: cp210x converter detected
usb 1-1.4: cp210x converter now attached to ttyUSB0
cp210x 1-1.4:1.1: cp210x converter detected
usb 1-1.4: cp210x converter now attached to ttyUSB1
cp210x 1-1.4:1.2: cp210x converter detected
usb 1-1.4: cp210x converter now attached to ttyUSB2
cp210x 1-1.4:1.3: cp210x converter detected
usb 1-1.4: cp210x converter now attached to ttyUSB3
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] PCIE GART of 2048M enabled (table at 0x0000000000324000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff88006a550c00
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000010000c04 and cpu addr 0xffff88006a550c04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000010000c08 and cpu addr 0xffff88006a550c08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0xffff88006a550c0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000010000c10 and cpu addr 0xffff88006a550c10
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90001036c98
radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000010000c18 and cpu addr 0xffff88006a550c18
radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000010000c1c and cpu addr 0xffff88006a550c1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 1 succeeded in 2 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 12 usecs
[drm] ring test on 7 succeeded in 2 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
audit: type=1400 audit(1569603522.507:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=575 comm="apparmor_parser"
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
rtl8192ce 0000:01:00.0: enabling device (0000 -> 0003)
rtl8192ce: Using firmware rtlwifi/rtl8192cfwU_B.bin
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: rtlwifi: wireless switch is on
[drm] ib test on ring 1 succeeded in 0 usecs
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
init: failsafe main process (617) killed by TERM signal
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
audit: type=1400 audit(1569603523.907:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=809 comm="apparmor_parser"
audit: type=1400 audit(1569603523.907:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=809 comm="apparmor_parser"
audit: type=1400 audit(1569603523.907:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=809 comm="apparmor_parser"
audit: type=1400 audit(1569603523.919:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=808 comm="apparmor_parser"
audit: type=1400 audit(1569603523.919:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=808 comm="apparmor_parser"
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[drm] ib test on ring 7 succeeded
audit: type=1400 audit(1569603523.963:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=810 comm="apparmor_parser"
audit: type=1400 audit(1569603523.963:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=810 comm="apparmor_parser"
audit: type=1400 audit(1569603523.963:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=810 comm="apparmor_parser"
audit: type=1400 audit(1569603523.963:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=810 comm="apparmor_parser"
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   HDMI-A-1
[drm]   HPD1
[drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm]   DVI-D-1
[drm]   HPD2
[drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY
[drm] Connector 2:
[drm]   VGA-1
[drm]   DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm] fb mappable at 0xC0728000
[drm] vram apper at 0xC0000000
[drm] size 5787648
[drm] fb depth is 24
[drm]    pitch is 6400
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x45
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[drm:radeon_acpi_init [radeon]] *ERROR* Cannot find a backlight controller
[drm] Initialized radeon 2.43.0 20080528 for 0000:00:01.0 on minor 0
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
random: nonblocking pool is initialized
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC272: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC1D0:    inputs:
snd_hda_codec_realtek hdaudioC1D0:      Mic=0x18
snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
init: alsa-restore main process (928) terminated with status 99
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-splash main process (1059) terminated with status 1
init: plymouth-stop pre-start process (1126) terminated with status 1
r8169 0000:02:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
systemd-hostnamed[2612]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
perf interrupt took too long (2518 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
audit_printk_skb: 33 callbacks suppressed
audit: type=1400 audit(1569668716.195:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=4199 comm="apparmor_parser"
audit: type=1400 audit(1569668716.195:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4199 comm="apparmor_parser"
audit: type=1400 audit(1569755117.006:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=5597 comm="apparmor_parser"
audit: type=1400 audit(1569755117.006:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=5597 comm="apparmor_parser"
audit: type=1400 audit(1569840978.345:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=6983 comm="apparmor_parser"
audit: type=1400 audit(1569840978.345:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=6983 comm="apparmor_parser"
systemd-hostnamed[8862]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[9262]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[9414]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 2-1.1: new high-speed USB device number 3 using ehci-pci
usb 2-1.1: New USB device found, idVendor=058f, idProduct=6387
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1: Product: Mass Storage
usb 2-1.1: Manufacturer: Generic
usb 2-1.1: SerialNumber: FD012E08
usb-storage 2-1.1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 2-1.1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 2:0:0:0: Direct-Access     Generic  Flash Disk       8.07 PQ: 0 ANSI: 4
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 15257600 512-byte logical blocks: (7.81 GB/7.28 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 2-1.1: USB disconnect, device number 3
systemd-hostnamed[10775]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[11303]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
i2c i2c-3: sendbytes: NAK bailout.
perf interrupt took too long (5014 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
i2c i2c-3: sendbytes: NAK bailout.
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 127
Raw EDID:
 	00 ff ff ff ff ff ff 00 cc 2f ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 129
Raw EDID:
 	00 ff ff ff ff ff ff 00 4c 2d 8d 05 30 32 4d 43
 	1c 13 01 03 80 2c 19 78 2a b8 11 a6 55 4b 9b 25
 	13 50 54 bf ee 80 71 4f 81 00 95 20 81 0f 95 0f
 	01 01 01 01 01 01 30 2a 40 c8 60 8f ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 122
[drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
i2c i2c-3: sendbytes: NAK bailout.
[drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
i2c i2c-3: sendbytes: NAK bailout.
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 190
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 4
Raw EDID:
 	00 ff ff ff ff ff ff 00 34 a9 96 a2 01 01 01 01
 	00 1a 01 03 80 80 48 78 0a da ff a3 58 4a a2 29
 	17 49 4b 21 08 00 31 40 45 40 61 40 00 07 ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 130
Raw EDID:
 	00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
i2c i2c-3: sendbytes: NAK bailout.
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 130
Raw EDID:
 	00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 22
Raw EDID:
 	00 ff ff ff ff ff ff 00 4c 2d 8d 05 30 32 4d 43
 	1c 13 01 03 80 2c 19 78 2a b8 11 a6 55 4b 9b 25
 	13 50 54 bf ee 80 71 4f 81 00 95 00 87 cf 97 ff
 	0d 07 81 81 01 01 30 2a 40 c8 60 84 64 30 18 7f
 	13 00 bb f9 10 00 00 1e 00 00 00 fd 00 38 4b 1e
 	51 0f 09 1e 20 20 20 20 20 20 00 00 00 fc 00 53
 	79 6e 63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff
 	00 48 51 42 53 37 30 31 35 36 32 0a 20 20 01 b1
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 130
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 70
Raw EDID:
 	00 ff ff ff ff ff ff 00 4c 2d 8d 05 31 32 4f ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 43
[drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 99
Raw EDID:
 	00 ff ff ff ff ff ff 00 34 a9 96 a2 01 01 01 01
 	00 1a 01 03 80 80 48 78 0a da ff a3 58 4a a2 29
 	17 49 4b 21 08 00 31 40 45 40 61 40 81 80 01 01
 	01 01 01 01 01 01 01 1d 00 bc 52 d0 1e 20 b8 28
 	55 40 ba 88 21 00 00 1e 01 1d 00 72 51 d0 1e 20
 	6e 28 55 00 ba 88 21 00 00 1e 00 00 00 fc 00 50
 	61 6e 61 73 6f 6e 69 63 ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 245
Raw EDID:
 	00 ff ff ff ff ff ff 00 4c 2d 8d 05 30 32 4d 43
 	1c 13 01 03 80 2c 19 7f 2e bf ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 91
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 91
i2c i2c-3: sendbytes: NAK bailout.
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 60
Raw EDID:
 	00 ff ff ff ff ff ff 00 4c 2d 8d 05 30 32 4d 43
 	1c 13 01 03 80 2c 19 78 2a b8 11 fe 55 4f bb 25
 	d3 50 54 bf ee 80 71 4f 81 00 95 00 81 0f 95 0f
 	01 01 01 01 01 01 30 2a 40 c8 60 84 64 30 18 50
 	13 00 bb f9 10 00 00 1e 00 00 00 fd 00 38 4b 1e
 	51 0f 00 0a 20 20 20 20 20 20 00 00 00 fc 00 53
 	79 6e 63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff
 	00 48 51 42 53 37 30 31 35 36 32 0a 20 20 01 b1
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 124
Raw EDID:
 	00 ff ff ff ff ff ff 00 4c 2d 8d 05 30 32 4d 43
 	1c 13 01 03 80 2c 19 78 2a b8 11 a6 55 4b 9b 25
 	13 50 54 bf ee 80 71 4f 81 00 95 00 81 0f 95 0f
 	01 01 01 01 01 01 30 2a 40 c8 60 84 64 30 18 50
 	13 00 bb f9 10 00 00 1e 00 00 00 fd 00 38 4b 1e
 	51 0f 00 0a 20 20 20 20 20 20 00 00 00 fc 00 53
 	79 7f ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 130
Raw EDID:
 	00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
i2c i2c-2: sendbytes: NAK bailout.
systemd-hostnamed[19041]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[23179]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[28733]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[28811]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 61
Raw EDID:
 	00 ff ff ff ff ff ff 00 4c 2d 8d 05 30 32 4d 43
 	1c 13 01 03 80 2c 19 78 2a b8 11 a6 55 4b 9b 25
 	13 50 54 bf ee 80 71 4f 81 00 95 00 81 0f 95 0f
 	01 01 01 01 01 01 30 2a 40 c8 60 84 64 30 18 50
 	13 00 bb f9 10 00 00 1e 00 00 00 fd 00 38 4b 1e
 	51 0f 00 0a 20 20 20 20 20 20 0f ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
i2c i2c-2: sendbytes: NAK bailout.
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 89
snd_hda_codec_hdmi hdaudioC0D0: HDMI ATI/AMD: no speaker allocation for ELD
snd_hda_codec_hdmi hdaudioC0D0: HDMI ATI/AMD: no speaker allocation for ELD
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 255
Raw EDID:
 	00 ff ff ff ff ff ff 00 4c 2f ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 74
Raw EDID:
 	00 ff ff ff ff ff ff 00 4c 2d 8d 05 30 32 4d 43
 	1c 13 01 03 80 2c 19 78 2a b8 11 a6 55 4b 9b 25
 	13 50 54 bf ee 80 71 4f 81 00 95 00 81 0f 95 0f
 	01 01 01 01 01 01 30 2a 40 c8 60 84 64 30 18 50
 	13 00 bb f9 10 00 00 1e 00 00 00 fd 00 38 4b 1e
 	51 0f 00 0a 20 20 20 7f ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 130
Raw EDID:
 	00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
i2c i2c-3: sendbytes: NAK bailout.
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 130
Raw EDID:
 	00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 198
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 64
Raw EDID:
 	00 ff ff ff ff ff ff 00 4c 2d 8d 05 30 32 4d 43
 	1c 13 01 03 80 2e 19 78 2a b8 11 a6 55 4b 9b 25
 	13 50 54 bf ee 80 71 4f 81 00 95 00 81 0f 95 0f
 	01 01 01 01 01 01 30 2b 40 e8 60 84 66 30 38 d0
 	13 00 bb f9 10 10 00 1e 00 00 00 fd 00 38 4b 1e
 	51 0f 00 0a 20 20 20 60 3f ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 130
Raw EDID:
 	00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 147
Raw EDID:
 	00 ff ff ff ff ff ff 00 4c 2d 8d 05 30 32 4d 43
 	1c 17 1f 0f 80 2c 19 78 2a b8 11 a6 55 4b 9b 25
 	13 50 54 bf ee 80 71 4f 81 00 95 00 81 0f 95 0f
 	01 01 01 01 01 01 30 2a 40 c8 60 84 64 30 3f ff
 	ff ff ff ff 10 00 00 1e 00 00 00 fd 00 38 4b 7f
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 130
Raw EDID:
 	00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
radeon 0000:00:01.0: DVI-D-1: EDID block 0 invalid.
[drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
i2c i2c-3: sendbytes: NAK bailout.
i2c i2c-3: sendbytes: NAK bailout.
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 227
Raw EDID:
 	00 ff ff ff ff ff ff 00 34 a9 96 a2 01 01 01 01
 	00 1a 01 03 80 80 48 78 0a da ff a3 58 4a a2 29
 	17 49 4b 21 0e 7f ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 100
i2c i2c-3: sendbytes: NAK bailout.
[drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID

Return To disk test Pico-PC System Information